Screen & Recoat vs. Refinishing
Make sure you actually need the full sand before paying for it.
Hardwood Floor Refinishing in Columbus, GA
When wear goes deeper than the finish, we sand to bare wood and rebuild your floor — dust-controlled, carefully done, with a finish system that lasts for years.
The Service
The full reset for hardwood floors
Full refinishing is the deepest service we offer — and the most transformative. We sand away the entire old finish and a paper-thin layer of wood, removing years of scratches, stains, discoloration and damage along with it. What's left is raw, honest wood: the same floor your home was built with.
From there we rebuild: stain if you want a new tone, then multiple coats of professional-grade finish, each cured and lightly abraded before the next. Done right, a refinished floor serves a home for a decade or more before needing anything more than cleaning.
Many floors that look "beyond help" only need a screen and recoat — we'll always check before recommending the full sand. Call 706-223-4435.
Benefits
What full refinishing delivers
Removes deep damage
Scratches into the wood, pet stains, water marks and gray traffic paths — all sanded away.
Adds real home value
Refinished hardwood is one of the strongest returns of any home improvement at resale.
Your choice of look
Sand to bare wood means the option to keep natural tone, go darker, or change the sheen.
Dust-controlled process
High-efficiency dust containment captures the vast majority of sanding dust at the machine.
A decade of service
A properly maintained refinished floor typically lasts 10+ years before needing a recoat.
Experienced local hands
From Midtown Columbus to Fortson, we refinish the valley's older hardwood floors with respect for the home.
Our Process
What refinishing looks like at your home
1. Estimate & plan
We measure, assess the wood and finish, discuss color and sheen options, and give you a written scope, schedule and price.
2. Prepare the space
Rooms are cleared, adjacent areas sealed, and the space readied so dust stays contained to the work zone.
3. Sand to bare wood
Progressive sanding passes — coarse to fine — remove the old finish, stains and damage, with dust extraction running throughout.
4. Stain (optional)
If you're changing tone, stain is applied and confirmed against a sample before the finish goes on.
5. Build the finish
Multiple coats of professional finish, each lightly abraded before the next, build a durable, even surface.
6. Cure & hand over
The final coat cures, we walk the floor with you, and you receive a care plan that protects the new finish.
FAQ
Refinishing questions, answered
How do I know my floors need full refinishing?
Signs include deep or gray scratches, finish worn through in traffic paths, water stains or discoloration in the wood, boards that look patchy after cleaning, or an existing recoat that no longer revives the floor. If stain or damage sits in the wood rather than on the finish, refinishing is usually the answer.
How messy is refinishing?
Modern refinishing uses dust-containment sanding systems that capture the vast majority of dust at the machine. It's not dust-free, but it's a far cry from the clouds homeowners remember from decades ago. We also seal off work areas and protect adjacent rooms.
How long does refinishing take?
A standard refinishing project typically takes three to five days from start to fully cured, depending on square footage, the number of coats, stain choice, and weather. You'll get a clear schedule before we begin.
Can you change the stain color when refinishing?
Yes. Sanding to bare wood opens up the option to keep the natural tone, go darker, or change color entirely. We can show samples on your own wood during the estimate.
Related Services & Reading
Before you commit to a full refinish
Wax Removal
Some "worn out" floors are just buried under decades of wax.
Screen & Recoat
The cheaper, faster option for floors whose wood is still sound.
Ready to Bring Your Hardwood Floors Back to Life?
Call or send a quick message — tell us what your floors look like and we'll schedule a free, no-pressure estimate anywhere in the Columbus area.
Free Estimate
Request Your Free Estimate
Tell us about your floors and we'll follow up by phone to schedule a walk-through. No obligation, no pressure.
Thank you — request received
Your request and any photos were sent to PTY Wood Floor Care. We'll call you back to talk about your floors. If you'd rather talk now, call 706-223-4435.